OMNIVALEA Headlight Bracket Repair Kit Right Mercedes E-Class W213 A2138202200

WHY THIS PART FAILS AND HOW THIS KIT SOLVES IT

On the W213 E-Class the headlight is located by slim plastic lugs and guide bushings molded into the housing, and these are the first things to snap in a low-speed parking impact, a stone strike or a careless bumper removal. Because the housing cannot be repaired invisibly, the official solution is a complete new headlight — and on this generation with MULTIBEAM LED units that means an extremely expensive repair for a few broken tabs. This kit solves the problem economically: precision-molded brackets and bushings fix onto the original housing and recreate the broken mounting points with original geometry.

WHAT TO CHECK BEFORE PURCHASING

This kit repairs the RIGHT headlight; the left side uses OEM number A2138202300. Inspect your lamp first and confirm the damage is limited to the mounting lug area; a cracked lens or a broken internal module is not repaired by this kit. The kit covers the W213 saloon, S213 estate and All-Terrain; the E-Class Coupe and Cabriolet (C238/A238) use different headlights and are not covered. Compare the bracket shapes with the broken sections of your housing before purchase.

PROFESSIONAL INSTALLATION NOTES

Remove the front bumper and the headlight following the procedure for your model, then clean each broken lug area and remove loose fragments so the brackets seat flat on the housing. Fix each bracket with the supplied screws without overtightening, as the housing plastic can strip, then refit the headlight and check the panel gaps to the bonnet and bumper before final tightening. Verify the beam height after any headlamp removal; on LED and MULTIBEAM units, confirm no fault codes are stored and the levelling function operates correctly before returning the vehicle to service.