OMNIVALEA Window Switch Button Cap 2 Pcs BMW 3 Series E46 E90 X5 X3 61316902175

WHY THIS PART FAILS AND HOW THIS SET SOLVES IT

BMW's soft-touch button coating of this era is notorious: after years of finger contact and sun, the cap surfaces turn sticky, peel in patches or the printed window symbols wear blank, and eventually the thin hinge clips crack so a cap pops off entirely — all while the switches underneath still work perfectly. BMW sells the remedy only as complete switches at many times the price. These caps replace just the worn surfaces, and the two-piece set matches how the wear actually appears: the driver's two most-used switches go first.

WHAT TO CHECK BEFORE PURCHASE

These caps fit the window switches of the E46 throughout its production, the E90 3 Series, the X5 E53 before its facelift and the X3 E83 before its facelift — later facelifted X5 and X3 switches use a different cap design, so compare the cap outline and clip positions with your originals or the product photos before ordering. Each cap covers one switch; single caps and a four-piece set for all doors are listed separately.

PROFESSIONAL INSTALLATION NOTES

Ease each old cap off its switch rocker with a small flat plastic tool, working from the front edge to release the hinge clips without scratching the trim. Clean any sticky coating residue from around the switch openings, then align each new cap with the window symbol upright and press it onto the rocker until both clips click home. Test each switch through its lift and lower positions and check the symbols glow evenly with the lights on.